ENGLISH
There are settings for normal drying and for delicates, indicated by the letters S and
Drespectively.
Any of the three 
settings (Figure 2A) indicates the end of the washing pro- gramme.
Temperature selection control
This enables you to select what temperatu- re you want to wash at. Simply turn it gently so that the signal matches the desired tem- perature. Should you not wish to wash in warm or hot water, turn the indicator to the cold water sign *.
Drying time selection control
This control enables you to select the drying time that you estimate you will need for your wash. Gently turn it clockwise so that the number of minutes coincides with the time printed on the control. All times are in minutes.
The drying programme has finished when the Selection control (7) is in the STOP posi- tion. If this control is set for any time at all, then the machine will run through a drying programme after the washing programme. If you do not want a drying programme, this control must always be set at STOP.
Using the control buttons
Stop/start button
porated into the machine to have deactiva- ted (approx. 2 minutes).
While the machine is running either a was- hing or drying programme, it can be termi- nated by pushing in the Pilot switch to its stop position (11).
When the button is pressed back to ON, the washing machine starts again from the same phase in the cycle where it was tur- ned off. Should you stop the machine at any time in order to put garments in or take any back out, make sure that the water level does not overflow from the open door and that the temperature inside the drum is not excessive, don’t forget that even with the switch off, you will have to wait long enough for the door’s safety block to be deactiva- ted.
Buttons for additional functions
By using these buttons, you will be able to incorporate a series of additional functions and features into any previously selected washing programme, which will enable you to adjust the washing of you garments to your own standards and needs.
Select the function you want by pressing the corresponding button.
Your washing machine will have some of the following functions, depending on which model it is.
– Spin dry bypass
button
If the programme runs through until the end, you will be able to open the loading door once the programme has finished and the necessary time has passed for the Safety Door Block System which is incor-
When you press this button, you remove the spin dry phase from whatever washing programme you have selected, which pre- vents creases from forming when washing special materials.
|
| END | GENTLE WASH PROGRAMMES |
| END | NORMAL WASH PROGRAMMES |
| ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• | S |
|
|
|
|
|
|
|
| S |
|
|
|
|
|
|
|
|
|
| S |
OT |
|
|
| • |
| •••••• •••• • | OT |
|
|
| • • | • | ••••• • •••• • • | OT | |||||||
10 | P |
| D 9 | 8 7 | P | S 6 5 | 4 | 3 | 2 1 | P | |||||||||||
|
|
|
| GENTLE DRYING PROGRAMME |
|
|
|
|
|
|
|
| FAST FORWARD |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| NORMAL DRYING PROGRAMME |
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
Fig. 2A
62
