Instructions for the user
14.6.2Setting the cleaning cycle
Use PT2 to select the pyrolysis function (
).
To start the cleaning (Pyrolysis) cycle, press the 
button to set its
duration. Press the 
or 
button to increase or decrease the
duration of the cycle from a minimum of 1h30m to a maximum of 3h 00m.
The word “Pyro” will appear on the display to indicate that the oven is being cleaned and at the same time the remaining time will be shown to finish the cleaning cycle.
One minute after the cleaning (Pyrolysis) cycle starts, an interlock device will be tripped, which prevents
opening of the door. The 
symbol lights up on the display to indicate that this interlock device has been activated.
At the end of the cleaning cycle (indicated by a buzzer and by STOP on the display) the interlock device will remain active until the temperature inside the oven has reached a safe temperature. When the oven has cooled down, collect the residues from automatic cleaning with a damp
To select a cleaning cycle with delayed start, after setting the duration press 
again. The 
symbol and the current time will appear on the display. By pressing the 
or 
buttons you can select the time when you wish cooking to start.
A few seconds after the required duration is set, the 
and 
symbols stay on, and the oven will start to wait for the starting time set for the cleaning cycle.
56
