Instructions for the user
15.EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Before performing any operations requiring access to powered parts, switch off the power supply to the appliance.
15.1 Changing the light bulb
Remove the protective cover A by unscrewing it counterclockwise; replace the bulb B with another of the same type (25 W).
Use only oven bulbs (T 500°C for pyrolytic models).
Use only oven bulbs (T 300°C for multifunction models).
15.2 Removing the door
Open the door completely and, using a small- ended screwdriver rotate the hinges A completely.
Grasp the door on the sides with both hands near the hinges, close it forming an angle of around 45° and remove it.
To reinsert it, groove B must be inserted with the oven's frame, putting hinge A in the position illustrated in the figure and pushing it all the way in with one push using a screwdriver or equivalent tool until you feel it click.
15.3 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs under the seal as shown in the figure.
57
