User Instructions
7.3.3Using the rotisserie in cooking ranges with a large oven
Insert the support framework on the second guide up from the bottom in such a way that the spit housing is outside the oven. Position the spit as shown in figure (1) and push the framework inside the oven until the end of the spit meets the corresponding hole for the rotisserie motor. Now push the rotisserie spit to the left (see position shown in figure 2). To activate this function, set the switch to position
(
).
These procedures must be carried out when the oven is switched off and cold.
At the end of the cooking process, pull the spit out of hole (3) using the appropriate tool and take out the framework (4) so that you can remove the rotisserie spit from the oven.
1
2 
3
4
15
