31
6. Procedure to install
3) Furniture door related work
12. Place the paper jig on the reference line of the paper jig at the rear side of the furniture door. (See Figure 7)
Reference - Place the reference line of the paper jig at 1595mm from the floor of the furniture.
-If the furniture door is long, place the reference line of the paper jig at 1595mm plus ‘A’ from the floor of the furniture.
(Figure 7)
Reference line | Reference line |
of paper jig (for | of paper jig (for |
the right hinge) | the left hinge) |
1595mm
A
13. Mark two holes of the paper jig at the furniture door. (See Figure 8)
Before fixing with the wood screw , make sure that the marked point is correct.
14. After removing the paper jig , place the top bracket of the furniture door on the furniture plate and then fix the top bracket of the furniture door with the wood screws
(four spots). (See Figure 9)
Reference - When fixing because the location of the top bracket is not correct, use the unused hole to fix.
(Figure 8)
(Figure 9)
8
b
b
