25
5. Installing the built-in refrigerator
The minimum space for ventilating should be prepared for the smooth heat exchange of the refrigerator.
1.It should be structured for air to enter from the intake hole and to exit from the discharge hole.
2.The passage ¡ should be secured when the passage ¨ is not secured.
3.200cm2 or more of the air ventilation at ¨ and ¡ should be secured.
Caution
Requirements for the furniture floor
-Floor:
We recommend to use T 20mm for securing the hardness.
-Base:
Install the base for the floor not to be deformed by the weight (200kg at maximum: product + food + furniture door + opening/closing shock, etc.).
-Parallelism:
If the level of the floor is not correct, it may cause to deform the entire furniture or not to close the door due to the weight of the product.
| 2 |
| Ceiling |
| min. 50mm |
| 1 |
min. 30mm |
|
| Wall |
| Secure the |
| ventilating hole |
min. 30mm | min. 200cm2 |
|
Floor plan of furniture and the maximum opening of the door
|
| Wall |
| Sidewall of furniture | 252mm |
600mm | 570mmmin | |
|
| min 560mm |
|
| Inner side of furniture |
Standard |
| Wall |
|
| |
Caution |
|
| Wall |
|
|
| Sidewall of furniture | min 570mm | Hinge | Hinge |
600mm |
| base | ||
Furniture door | ||||
|
| |||
|
| min 560mm | 237mm | 3mm |
|
| Inner side of furniture |
| |
|
|
|
| |
|
|
| (Distance from |
|
|
|
| the wall when |
|
|
|
| completely |
|
|
|
| opened) |
|
Special case | Wall |
| ||
|
|
-Securely fix the side plate of the furniture at the wall or the adjacent furniture. Because the product is fixed with the screws from the hinge to the side plate of the furniture, secure the side plate of the furniture at the hinge by 30T or more. (Additionally, the rigid plate with 15T or more should be attached at the side plate of the furniture for the refrigerator to install.) If the side plate is thin, the product may be easily shaken when the screws directly touch the wall.