36
6. Procedure to install
6) Changing the opening direction of the refrigerator door
Before installing, change the door to work.
1. Loosen the screws and at the hinge of the case section, and push the door to the right to disconnect. (See Figure 20)
2. Completely loosen the screws and , and then fix them at the opposite side loosely. (See Figure 20)
3. Loosen the screws and fixed to the door to disconnect the hinge.
(Figure 20)
4.Move the disconnected hinge to the diagonal direction as shown at Figure 21, turn it 180°, and then fix the hinge to the door.
5.Align the door hinge with the screw fixed at the case, and push from the left to the right.
6.Adjust the top/bottom/left/right gap of the refrigerator door to remove tilting, and then secure the screws.
7.After fixing the hinge, insert the
cap screws (two spots) at the opposite holes of the hinge.
(Figure 21) |
