21
1.Note before installing
Caution
Install the product at the place avoiding the heat from the heater or the boiler or the direct sunlight, with the shade and the good ventilation always.
Prepare the furniture possible to circulate air by referring to the size.
Install the product for air to smoothly flow via the front intake hole. If not, it may cause to prevent the normal performance of the product.
Install the product at the place where no outsider enters or exits because it may damage the power cord to cause fire.
If the furniture door gets too long for securing the space over the space, use the furniture with the specified size because the furniture may be sagged down or cause the inconvenience to use.
After installing the door, make sure that no
If the furniture has any soft material (for example, plaster), use the furniture made of solid material because it has the weak bonding strength and may be damaged.
Use the furniture not twisted by heating from the product or not bent by water generated by opening/closing the refrigerator door.
Install the product at the place with the correct horizontal/vertical size of the furniture (within 1mm horizontally and vertically). If the furniture has no correct horizontal/vertical position or the product is installed on the soft base, the side plate may be deformed or the furniture may be slowly twisted for a long time.
(When 100kg load is applied, use the material or the structure with no gradual deformation.)
Install the
When installing, protect the children from using the installing part or the installing location.
When working, take out the screw one by one from the packaging vinyl for preventing the damage due to being left.
Do not use the
Before installing, make sure that the product normally operates by connecting the power cord.
