Instructions for the Installer
8.2Securing the appliance to the cabinet
8.2.1 Securing the side brackets
Fit the two provided brackets to the short sides of the appliance as shown in figura
4) | 5) |
8.2.2 Securing the front/rear brackets
The hob is equipped with 10 brackets "A" (see fig. 6) which secure and level it relative to the cabinet top. Depending on whether the hob is to be installed to a cabinet of 20mm to 30mm thickness (Detail "C") or 30mm to 50mm thickness (Detail "B"), the brackets "A" mount to different holes in the hob's casing (see fig. 7).
6)
7)
Important:
•When fixing this product to the supporting structure, do not use mechanical or electric screwdrivers and apply only moderate pressure to the fixing components by hand.
•When fixing the product, always use the brackets provided in all fixing points.
•If this product is installed above an oven, the oven must be fitted with a cooling fan.
•Apply a coat of proofing primer to the cut surface of the top
32
