Installation
1. Removing the packaging reinforcements
To remove the packaging reinforcement lean the machine backward, take the reinforcement by pulling from the braid.
2. Removing the transportation safety bolts
Before operating the machine, the transportation safety bolts must definitely be removed. For this,
1. Loosen the “C” bolts thoroughly by turning them anticlockwise with the help of a suitable wrench.
2. Pull off the transportation safety bolts.
3. Insert the “P” plastic caps in the direction of arrow into the holes from where the transportation safety bolts are removed.
Please note! Keep the transportation safety bolts in a safe place in order to reuse them for any other transportation. Transport your washing machine with the transportation safety blots installed.
3. Adjusting the feet
Your machine must stand level and balanced on its feet in order to operate more silent and
First loosed the plastic counter nut on the adjustable feet of your machine.
After maintaining the balance by adjusting the feet, tighten the plastic counter nut upwards.
6
