Smeg PTS605U3, PTS605BU3, PTS605NU3 important safety instructions Conversion Kit

3)

Conversion Kit

Remove all the burner components in the numerical order shown below:

•Remove the pan stands (Fig.1) by lifting them from the back (1) and extracting them (2). (On 70 cm cooktops remove the central pan stand first; on 60 cm cooktops the right-hand pan stand must be removed first);

•remove all the knobs (3, Fig. 2) by pulling them outward;

•lift all the burner components off the cooktop (4-5, Pic. 2);

•use the wrench 6 (Fig. 3) to open the bayonet fastenings of the burner fixing rings, applying leverage on the guides 7;

•after removing all the components described above, lift the front of the cooktop's upper surface (8, Fig. 4).

•the burners and gas taps can only be accessed by pushing the rear of the cooktop gently upwards with the aid of a tool (9-10, Fig. 5).

This is necessary to release the internal snap fixing devices. The cooktop's upper surface can now be removed. Some models may have 2 additional pins at the side (Fig. 5), which must be removed in the same way, using a tool to apply leverage to the cooktop.

Fig. 1) Fig. 2)

Fig. 3)

Fig. 4) Fig. 5)

5