Smeg SA683X-1, SA683X-2 instruction manual Changing the Program

User instructions

CHANGING THE PROGRAM

To change the program, press and hold down the START/PAUSE button

(3)for a few seconds, then select the new program as described previously in the instructions; press the START/PAUSE button (3) again, holding it down for a few seconds.

6 5 4 3 12 2 1

10 9 8 7 11

DELAYING THE PROGRAM (available in all programs except the soak program)

The PROGRAM DELAY button (4) can be pressed to delay the start of the washing program by up to 12 hours. This means that the dishwasher can be operated at the time of day of your choice.

Press the PROGRAM DELAY button (4) again; the INFORMATION DISPLAY (8) will show the number of hours of delay with which the appliance will start.

The INFORMATION DISPLAY (8) shows the set washing program duration in hours and minutes.

After setting the delay, start the program: press the START/PAUSE button (3) for a few seconds, until the START/PAUSE light (7) starts flashing.

The appliance will prewash the dishes, after which the "program delay" set previously will come into effect.

To cancel the program delay once the wash has started, proceed as follows:

ξpress the START/PAUSE button (3) for a few seconds, until the START/PAUSE light (7) stops flashing;

ξpress the PROGRAM DELAY button (4) several times until the program delay returns to zero (the scheduled duration of the program set appears);

ξpress the START/PAUSE button (3) to start the program.

N.B.: It is not possible to select the “delay program” when the program have already began.

15