Smeg SA683X-2, SA683X-1 User instructions, Cleaning The Filter Unit, Prolonged Disuse

Models: SA683X-2 SA683X-1

1 34
Download 34 pages 63.41 Kb
Page 29
Image 29
CLEANING THE FILTER UNIT

User instructions

CLEANING THE FILTER UNIT

It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards;

push the centre filter D from the underside to remove it from the micro-filter:

separate the two parts which make up the plastic filter by pressing the body of the filter in the zone shown by the arrows;

remove the centre filter by lifting it upwards.

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE:

ξThe filters should be cleaned under running water using a stiff brush.

ξWhen removing the filter, take care that there are no food residues on it. If any residues fall into the washing pit they might block hydraulic components, or foul the spray arm nozzles.

ξIt is essential to thoroughly clean the filters according to the above instructions: the dishwasher cannot function if the filters are clogged.

ξCarefully replace the filters in their seats, to avoid damaging the wash pump.

PROLONGED DISUSE:

ξRun the soak program twice in succession.

ξUnplug the power cord from the socket.

ξLeave the door slightly open, in order to prevent the formation of unpleasant odours inside the washing tank.

ξFill the rinse aid dispenser.

ξShut off the water supply tap.

29

Page 29
Image 29
Smeg SA683X-2, SA683X-1 User instructions, Cleaning The Filter Unit, Prolonged Disuse, ξFill the rinse aid dispenser