Smeg SA683X-2, SA683X-1 User instructions, HALF LOAD WASH FUNCTION on some models only

User instructions

"2/1" OPTION BUTTON (on some models only) (available in all programs except the soak program)

By pressing the button (6) you activate the "2/1" option, confirmed when the relative light comes on. This option has been studied for the use of dishwashing powder or tablets with integrated substances in place of rinse-aid known on the market as “2 in 1” or “double action" products; in this case the dishwasher will use the product in an optimal way avoiding salt and rinse-aid consumption, which could already be found in the dishwasher.

Note: When selecting the "2/1" button, it is normal that the rinse-aid light remain on, if the container are empty.

HALF LOAD WASH FUNCTION (on some models only)

This function is recommended for loads of up to 6 place-settings, and cuts down on the use of water and electricity.

By pressing the ½ LOAD WASH (5) button it is possible to select only upper basket washing.

After having the program selected, continue as follows:

•by pressing for one time the ½ LOAD WASH (5) button, it will select the upper basket (the "½ LOAD WASH LIGHT " (9) comes on);

•by pressing a second time the ½ LOAD WASH (5) button it will bring back to the full load washing mode (the "½ LOAD WASH LIGHT " (9) goes out).

One half of the cutlery basket can be placed in the top basket.

WARNING: do not load dishes and cutlery into the lower basket, because the water spray will only reach the top basket.

16