User instructions
3.3 Washing programs
The dishwasher is equipped with a control panel and an INFORMATION DISPLAY (8) from which it is possible to carry out all the power switch- on,
6 | 5 | 4 | 3 | 12 | 2 | 1 |
10 9 | 8 | 7 | 11 |
Before starting a washing program make sure that:
•The water supply tap is open.
•The correct amount of detergent has been added to the dispenser.
•The baskets have been correctly loaded.
•The spray arms are able to rotate freely and without obstruction.
•The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the START/PAUSE button (3) for a few seconds, until the beep of confirmation is heard.
At this point, to end the program, press the HALF LOAD (5) and START/PAUSE (3) buttons simultaneously.
"P0" appears on the INFORMATION DISPLAY (8) and the dishwasher will automatically switch to the end of the cycle, displaying the word "End" when done.
14