Instructions for the user

12.2 Removing the door 12.2.1 With type 1 movable levers

With the door completely open, lift

the levers A of the two hinges until they touch the hinges B and take

hold of the two sides of the door with both hands close to the hinges

themselves. Raise the door to an angle of about

45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, and lower the levers A.

12.2.2 Removing doors with pins

Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to an angle of about 45° and lift it off. To reassemble, fit the hinges into their grooves, then lower the door into place and extract the pins.

12.3 Removing the door seal

To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.

38

Page 16
Image 16
Smeg SC321N, SC321X manual Removing the door seal, Removing the door 12.2.1 With type 1 movable levers