Smeg SE2631TC Operations, Your new hob with Touch-Controloperation, Touch-Controlkeys, 224379

Models: SE2631TC

1 49
Download 49 pages 50.46 Kb
Page 19
Image 19
1. Operations

1. Operations

1.1 Your new hob with Touch-Control operation

This manual covers the model SE 2631 TC.

1.2 Touch-Control keys

After the supply voltage has been connected (mains connection), a self-test is carried out which is concluded when a short acoustic signal is to be heard.

￿On/off key (control)

￿Locking key

￿Control lamp lock (control)

￿ Minus key

￿Plus key

￿ Cooking zone key

￿ Cooking level display

￿Cooking zone stand-by dot (lit: cooking zone can be used)

1.3Touch-Control operations

Each key operation is always confirmed by an acoustic signal.

Pressing the on/off switch key ￿ switches on the control system. Put your finger on the button until a “0” lights up at all of the cooking level displays and the cooking zone stand-by dot ￿flashes. The next action must be carried out within ten seconds, otherwise the control system will automatically switch off again.

To switch on a cooking zone, press the corresponding cooking zone key ￿ of the required cooking zone. The appropriate cooking zone stand-by dot ￿ of the activated cooking zone lights up.

Select a cooking level from 1 to 9 by means of the minus or plus keys ￿/￿. When switched on, each cooking zone can be switched off again at any time. To do this, the required cooking zone must be activated; the cooking zone stand-by dot ￿ lights up.

The minus key ￿ can be used to turn the cooking level down to “0”; if the minus and plus keys ￿+￿ are pressed at the same time, the cooking zone can be switched off directly.

In all cases the complete control system can be switched off at any time by pressing the on/off key ￿. To switch off the entire cooking range place your finger briefly on the on/off key ￿ until the control lights go out.

Pressing locking key ￿ prevents all the keys - with the exception of the on/off key ￿ from being operated by mistake. Successful locking is indicated by the control lamp ￿. Pressing the locking key ￿ cancels this command again.

Residual heat display

Residual heat is displayed by means of an illuminated “H” on the appropriate cooking level display ￿.

224379

19

Page 19
Image 19
Smeg SE2631TC Operations, Your new hob with Touch-Controloperation, Touch-Controlkeys, 1.3Touch-Controloperations, 224379