Cleaning and maintenance
3.To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely in the slots. Lower the door and once it is in place remove the pins from the holes in the hinges.
4.6 Cleaning the door glazing
The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and an ordinary detergent.
We recommend the use of cleaning products distributed by the manufacturer.
4.7Removing the internal glass panels
For easier cleaning the door internal glass panels can be disassembled.
1.Remove the internal glass panel by pulling the rear part gently upwards,
following the movement indicated by the arrows (1).
2.Then, pull the front part upwards (2). In this way, the 4 pins attached to the glass detach from their housings in the oven door.
3.Clean the external glass panel and the panels previously removed. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and neutral detergent.
4.Replace the panels in the reverse order in which they were removed.
16
