Cleaning and maintenance
8.For improved hygiene and to avoid food being affected by any unpleasant odours, we recommend that the oven is dried using a
We recommend that you use rubber gloves for these operations.
For easier manual cleaning of the parts difficult to reach, we recommend that you remove the door.
4.10 Extraordinary maintenance
Live parts
Danger of electrocution
•Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
Replacing the internal light bulb
1.Completely remove all accessories from inside the oven.
2.Remove the racks/trays support frames.
3.Remove the bulb cover using a tool (e.g. a screwdriver).
4. Slide out and remove the lamp.
EN
Do not touch the halogen lamp directly with your fingers, but wrap it in an insulating material.
5.Replace the lamp with one of the same type (40W).
6.Refit the cover correctly, so that the moulded part of the glass is facing the door.
7.Press the cover completely down so that it attaches perfectly to the bulb support.
Removing the door seal
To permit thorough cleaning of the oven, the door seal may be removed. There are fasteners on all four sides to attach it to the edge of the oven. Pull the 4 edges of the seal outwards to detach the fasteners.
19