Instructions for the installer

15.2 Gas connection

This appliance is suitable for installation with Natural Gas or LPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of LPG (propane) appliances.

Connection of the appliance to the gas supply must be in accordance with the requirements of AS5601. A ½” BSP connector at the inlet is recommended and the gas supply line to the appliance must be of adequate length to allow sufficient withdrawal of appliance for service or disconnection and be annealed copper pipe.

The cooker must be installed with provision to allow the gas to be turned off and disconnected for servicing and removal of the appliance as required from the gas supply.

Before the cooker is operated make certain all relevant parts are placed in the correct position.

When the installation is completed the installation connections of cooker will require to be leak tested, the burner operating pressure and flame checked and adjusted.

Warranty service calls do not cover these adjustments!

To check the operating pressure of the appliance it is recommended at least 2 large size burners are used. Ensure appliance is secured to wall when installation is completed.

N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0 kPa after installation.

L.P.G. Can be connected to the inlet fitting directly. The pressure must be checked to ensure it is operating at 2.75 kPa. A separate test point fitting must be installed between the piping & the appliance for the pressure to be checked to ensure it is operating at 2.75 kPa.

15.3 Room ventilation

Caution – This cooker may only be installed and operated in rooms permanently ventilated in accordance with current regulations. For proper operation of a gas appliance it is essential for the air necessary for combustion of the gas to be able to flow naturally into the room. Air must flow directly into the room through openings in its outside walls.

This (these) opening (s) must have a free passage cross-section of at least 100 cm 2, or 200 cm 2 for appliances not equipped with gas safety device. These openings must be constructed so that they cannot be obstructed indoors or outdoors, and should preferably be close to the floor on the side opposite to the combustion gas discharge point. If it is not possible to make the openings in the room where the cooker is installed, the necessary air may be taken from an adjoining room, proveded it is not a bedroom or a room with fire risk.

21

Page 18 Page 20
Page 19
Image 19
Smeg SNZ90MFX, SNZ91MFA, SNZ91MFX manual Gas connection, Room ventilation
Page 18 Page 20

SNZ91MFX, SNZ90MFX, SNZ91MFA specifications

The Smeg SNZ91MFA, SNZ90MFX, and SNZ91MFX are a trio of high-quality built-in ovens that cater to the modern cook's needs, offering an impressive range of features and technologies. Each model combines Smeg's renowned Italian craftsmanship with innovative cooking technologies, ensuring a delightful culinary experience.

The Smeg SNZ91MFA is a versatile combination oven, equipped with advanced features designed to enhance the cooking experience. It boasts a spacious interior, allowing users to prepare multiple dishes simultaneously. This model includes an intuitive control panel that features touch controls, making it easy to select cooking functions and adjust settings. The built-in fan ensures even heat distribution, resulting in perfectly cooked meals every time. Additionally, this oven incorporates a self-cleaning function, which utilizes pyrolytic technology to burn away food residues, making maintenance effortless.

On the other hand, the Smeg SNZ90MFX presents a sleek design that fits seamlessly into any kitchen aesthetic. This model features a multifunctional cooking system, providing users with several cooking modes, from traditional baking to grilling and steaming. The intuitive digital display simplifies navigation, while the high-quality stainless steel exterior ensures durability and easy cleaning. The SNZ90MFX also includes a telescopic rail system that allows for easy access to dishes in the oven, making it a practical choice for home cooks.

Lastly, the Smeg SNZ91MFX delivers premium performance with its advanced steam cooking technology. This feature is particularly beneficial for health-conscious users, as it locks in flavors, nutrients, and moisture, providing a wholesome cooking experience. The SNZ91MFX also comes with an integrated meat probe, which helps in achieving precise cooking temperatures, ensuring perfectly cooked meats every time. The model's elegant design is complemented by its concealed heating elements, promoting easy cleaning and a streamlined aesthetic.

In summary, the Smeg SNZ91MFA, SNZ90MFX, and SNZ91MFX represent the pinnacle of modern oven technology. With features such as pyrolytic cleaning, multifunctional cooking modes, steam cooking, and intuitive controls, these models cater to a wide range of culinary preferences. Their stylish designs not only enhance kitchen décor but also offer practicality and efficiency, making them excellent additions to any home. Whether you are a novice cook or a seasoned chef, Smeg’s innovative ovens provide the tools you need to elevate your culinary skills.
Top Page Image Contents