Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers.

Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are generated.

For free-standing models only

-Installing a hob on top of a free-standing dishwasher is absolutely forbidden.

-If the appliance is not built-in and is therefore accessible on one side, the door hinge area must be covered for safety reasons (injury hazard). The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

-To build in the dishwasher, the special kit must be purchased from authorised dealers or the After-Sales Service.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.



Page 16 Page 18
Page 17
Image 17
Smeg STA6045BE, STA6047, STA6145 instruction manual Installation instructions, Installation and hook-up
Page 16 Page 18

STA6045B, STA6047, STA6145, STA6045BE specifications

Smeg STA6045BE, STA6145, STA6047, and STA6045B are premium built-in steam ovens designed to elevate culinary experiences. Renowned for their innovative features, these models integrate advanced technologies, making it easier for home cooks and professional chefs alike to achieve restaurant-quality results.

The Smeg STA6045BE is a standout model in the range, offering a spacious 45 cm height with a cooking capacity that accommodates various dishes. One of its key features is the steam-assisted cooking, which helps retain food moisture and nutrients while ensuring a perfect texture. This model comes equipped with multiple cooking functions, including steam cooking, conventional cooking, and a combination mode that utilizes both steam and dry heat for optimal results. The user-friendly control panel and intuitive interface make it simple to select cooking settings and monitor progress.

The STA6145, another high-performance model, enhances the cooking experience with its sleek aesthetics and high-quality build. It features a sophisticated water reservoir that precisely manages steam levels, ensuring consistent cooking results. Additionally, the STA6145 includes a self-cleaning function that utilizes steam to clean the oven cavity, saving time and effort in kitchen maintenance. Its built-in temperature probe allows precise monitoring of food, ensuring perfect doneness every time.

The Smeg STA6047 brings versatility to the table with additional cooking programs designed for various cuisines. This oven excels in multiple cooking methods, including sous-vide, baking, and reheating, showcasing its adaptability in the kitchen. The STA6047 is particularly noted for its energy efficiency, thanks to its advanced insulation and smart temperature controls, which help reduce power consumption.

Finally, the STA6045B model combines style with state-of-the-art functionality. Equipped with a compact design, it fits seamlessly in any kitchen layout. Like its counterparts, it offers steam cooking capabilities but adds unique features such as a user-defined steam level for personalized cooking experiences. Its sleek finish and aesthetic design further enhance its appeal, making it not just a kitchen appliance but a design statement.

In summary, the Smeg STA6045BE, STA6145, STA6047, and STA6045B stand out with their impressive steam cooking technology, elegant designs, and innovative features. Each model offers a unique set of functionalities aimed at improving kitchen efficiency and enhancing the overall cooking experience. Whether you’re a seasoned chef or a novice, these steam ovens are designed to inspire culinary creativity.
Top Page Image Contents