Worth Data P11/12 user manual Installation, Components of WDP Reader, Chapter

Chapter 1

Installation

Components of WDP Reader

In the event the shipping box shows damage on arrival, please note the damage on the carrier's receipt log. Open the box and inspect the contents for damage. If there is visible damage, or if the unit fails to work, contact us with the details of the trouble; we will be happy to send you a replacement.

The contents of your WDP Reader shipment should include the following:

1.A WDP Reader in a lightweight box, or an Integrated Laser Reader or an Integrated CCD Wedge Reader.

2.Velcro strips which can be used to conveniently attach the reader to the side of your computer, monitor or desk.

3.A "Y" cable for attaching the WDP Reader between your computer and keyboard to a 5 pin din or 6 pin minidin keyboard connector; or if you have a USB only computer, a straight cable with the USB Wedge Saver for attachment to the USB port of your computer.

4.A rugged stainless-steel bar code wand (unless you have an Integrated Laser or Integrated CCD Wedge Reader, or ordered a different input device such as a laser scanner or slot scanner).

5.A plastic wand or laser-scanner holder.

6.A laminated Reader Setup Menu sheet (or slot-scanner card deck).

You probably didn't receive a power supply with your WDP - even though your external WDP decoder box has a Power jack. Power supplies are rarely needed. Using a power suppply other than a Worthington Data Power Supply, (i.e. our part number F10 for 110v), will probably burn out the WDP circuit board. Damage caused by non-Worthington power supply which is not covered by warranty. DON'T PLUG OTHER POWER SUPPLIES INTO THE WDP -- even if the connector does fit, you will fry the WDP board.

1-1