GE 164D3333P185-1 Tools You Will Need, Additional Materials You May Need, For leveling legs

Read these instructions completely and carefully.

Tools You Will Need

For leveling legs:	For conversion from Natural to LP gas:
■Channel lock pliers	■1/2-inch open-end wrench
For gas supply connection:	For burner flame adjustment:
■Pipe wrench	■Phillips head and blade-type screwdrivers

Additional Materials You May Need

Safety Instructions Operating Instructions

■Gas line shut-off valve.

■Pipe joint sealant that resists action of LP gas.

■1/2-inch pipe nipple.

For Rigid Connection:

■Pipe fittings as required.

For Flexible Connection:

■Flexible metal appliance connector (same 3/4-inch or 1/2-inch I.D. as gas supply line).

■Flare union adapter line

(1/2-inch NPT x 3/4-inch or 1/2-inch I.D.).

Care and Cleaning

Installing the Backguard

Remove the cooktop.

Place the backguard on top of the end panels at the rear of the range.

Connect the “disconnect plug” (for power to the backguard from the range).

Insert the machine screws through the lower inside flange of the end caps and the end panels. Secure with the hex nuts provided.

Insert the machine screws through the elongated holes at the bottom of the backguard and side flange of the burner box. Secure with the hex nuts provided.

Attach the lower edge of the backguard to the vent outlet with 2 sheet metal screws.

25

Installation Instructions Troubleshooting Tips Customer Service