Oven Control

Your oven is controlled by an OVEN TEMP knob. It will normally take 30-90 seconds before the flame comes on.

After the oven reaches the selected temperature, the oven burner cycles—off completely, then on with a full flame—to maintain the selected temperature.

Air Adjustment

Safety Instructions Operating Instructions

Loosen

Air adjustment shutter

An air adjustment shutter for the oven burner regulates the flow of air to the flame.

You’ll find the shutter against the back wall behind the broiler drawer. To reach it remove the oven bottom (see the Care and cleaning of the range section) and the burner baffle.

To adjust the flow of air, loosen the Phillips head screw and rotate the shutter to allow more or less air into the burner tube as needed.

When the right amount of air flows into the burner, the flame should be steady, with approximately 1/2 inch blue cones, and should not extend out over the baffle edges.

Care and Cleaning

Bump

Oven Shelves

 

The shelves are designed with stop-locks

 

so when placed correctly on the shelf

 

supports, they will stop before coming

 

completely out of the oven and will not

 

tilt when you are removing food from

 

them or placing food on them.

 

When placing cookware on a shelf,

 

pull the shelf out to the bump on the

 

shelf support. Place the cookware on the

 

shelf, then slide the shelf back into the

 

oven. This will eliminate reaching into

 

the hot oven.

 

To remove the shelves from the oven, pull

 

them toward you, tilt front end upward

 

and pull them out.

 

To replace, place shelf on shelf support

 

with stop-locks (curved extension of

 

shelf) facing up and toward back of oven.

 

Tilt up front and push shelf toward back

 

of oven until it goes past the bump on the

 

shelf support. Then lower front of shelf

 

and push it all the way back.

11

Installation Instructions Troubleshooting Tips Customer Service

Page 10 Page 12
Page 11
Image 11
GE 164D3333P185-1 owner manual Oven Control, Oven Shelves, Care and Cleaning
Page 10 Page 12

164D3333P185-1 specifications

The GE 164D3333P185-1 is a high-performance component designed for industrial applications, particularly in the field of electrical engineering. This product demonstrates a blend of advanced technology, reliability, and efficiency, which makes it a preferred choice for various sectors.

One of the standout features of the GE 164D3333P185-1 is its robust design. Constructed with durable materials, it is built to withstand challenging environmental conditions. This durability ensures that it maintains performance integrity over time, minimizing the need for maintenance and reducing downtime in industrial operations.

The component incorporates state-of-the-art technologies that enhance its functionality. It utilizes advanced sensor technology, which allows for precise monitoring and control of electrical systems. This capability is crucial in applications where accuracy and reliability are paramount. Additionally, the GE 164D3333P185-1 is equipped with innovative power management features that improve energy efficiency, leading to cost savings in operational expenses.

Another key characteristic of the GE 164D3333P185-1 is its versatility. It can be seamlessly integrated into various systems, whether in manufacturing, energy production, or commercial applications. This adaptability makes it a valuable asset in the ever-evolving industrial landscape.

The GE 164D3333P185-1 also promotes enhanced safety features. It includes built-in protection mechanisms that guard against electrical surges and faults, ensuring a safe operational environment. This attribute is particularly important for organizations that prioritize safety and risk management as part of their operational protocols.

Moreover, the ease of installation and user-friendly interface of the GE 164D3333P185-1 simplify the integration process. Technicians can efficiently set up and operate the component without extensive training, leading to quicker project turnaround times.

In summary, the GE 164D3333P185-1 is an exemplary product that showcases the best of modern engineering. With its robust design, advanced technologies, energy efficiency, safety features, and versatility, it stands as a critical component for industries looking to enhance their operational capabilities. Adopting the GE 164D3333P185-1 means investing in a future-proof solution that addresses the demands of today's dynamic industrial environments.
Top Page Image Contents