FLOORING UNDER THE RANGE
Your range, like so many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting.
When moving the range on this type of flooring, it should be installed on a 1/4″ thick sheet of plywood (or similar material) as follows: When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing.
LEVELING THE RANGE
Safety Instructions Operating Instructions Care and
Leveling legs are located on each corner of the base of the range. Your range must be level in order to produce proper cooking and baking results. After it is in its final location, place a level horizontally on any oven shelf and check the levelness front to back and side to side. Level the range by adjusting the leveling legs or by placing shims under the corners as needed.
One of the rear leveling legs will engage the
Cleaning Installation Instructions
Read and follow this Safety Information carefully.
SAVE THESE INSTRUCTIONS
7
Troubleshooting Tips Customer Service