Trouble Shooting Guide
During the service, you can come across some troubles that in most cases result from improper handling of the appliance and can easy be eliminated.
The Appliance Fails to Operate After Connecting to the Mains Supply
•Check the supply in the outlet socket and make sure the appliance is switched on.
The Red Light is On
•The door was frequently opened or it was left opened for too long.
•The door is not properly closed (the door may sag, the gasket may be polluted or damaged).
•Power supply has been interrupted for a longer period of time.
•Perhaps you have overloaded the appliance with fresh foods.
Continuous Operation of the Cooling System
•Set the thermostat knob from the position for continuos to the position for automatic operation.
•The reason may be inadequate ventilation of the compressor and condenser (assure adequate air circulation behind the appliance and wipe the dust from the condenser).
The Door is Hard to Open
If you want to open the door that has just or recently been closed, you may find it hard to open. The reason why this happens is, that when you open the door, warm air gets into the appliance and when it is cooling, the underpressure seals the door. After few minutes
Noise
Cooling in
•During the operation of the compressor the noise of liquid is heard and when the compressor is not operating, the refrigerant flow is heard. This is a normal condition and it has no influence whatsoever on the lifetime of the appliance.
•After starting the appliance, the operation of the compressor and the refrigerant flow may be louder, which does not mean that
64 | Instructions for Use |
