www.smoothfitness.com
ASSEMBLY
STEP 5: Assemble the Handlebar |
|
|
(A) Place the Nylon Bushing (706) into the Console Support Tube (101). | 706 | X2 |
NOTE: THE EMBOSS SHAPE OF NYLON BUSHING MUST OUTWARD |
|
|
TO HANDLEBAR. | 513 | X2 |
| ||
(B) Assemble the Handlebar – Attach the Right (103) to the Console Support |
|
|
Tube (101) with M8x20mm Allen Head Bolt (515), 8x14xT2.0mm Spring | 514 | X2 |
Washer (514), and 8x27x2mm Metal Washer (513) 8x27x1mm Plastic | ||
Washer (520). Tighten bolt and then press the Action Handlebar Cap |
|
|
(707) into the Handlebar. | 515 | X2 |
| ||
(C) Connect the Hand Pulse Sensor Wire – Middle (608) to the Console |
|
|
Housing – Bottom (307) | 520 | X2 |
(D) Repeat the above procedure to assemble the left side. |
|
|
| 707 | X2 |
|
|
|
23
707 515 513 520
307
103
103
608
514 706
101
706
