SMSC TMC2005-JT Vss, Vss, MIN, MAX, ITEM, UNIT, ITEM, UNIT, ITEM, UNIT, SYMBOL, RATING, SYMBOL, RATING, SYMBOL, CONDITION, MAXIMUM GUARANTEED RATINGS

ARCNET 5 Port HUB Controller

Datasheet

OPERATIONAL DESCRIPTION

MAXIMUM GUARANTEED RATINGS*

Stresses above those listed may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other condition above those indicated in the operational sections of this specification is not implied.

(Note) When powering this device from laboratory or system power supplies, it is important that the Absolute Maximum Ratings not be exceeded or device failure can result. Some power supplies exhibit voltage spikes or “glitches” on their output when the AC power is switch on or off. In addition, voltage transients on the AC power line may appear on the DC output. If this possibility exists it is suggested that a clamp circuit be used.

Vss = 0V

		ITEM	SYMBOL				RATING			UNIT
	POWER SUPPLY VOLTAGE		VDD			-0.3 +7.0				V
	INPUT VOLTAGE		VIN				-0.3 VDD +0.3			V
	OUTPUT VOLTAGE		VOUT				-0.3 VDD +0.3			V
	AMBIENT TEMPERATURE		Tstg			-40 +125				°C
STANDARD OPERATING CONDITION
Vss = 0V
		ITEM	SYMBOL				RATING			UNIT
	POWER SUPPLY VOLTAGE		VDD				4.5 – 5.5			V
	AMBIENT TEMPERATURE		Ta				0 - +85			°C
DC CHARACTERISTIC - INPUT PIN
	SYMBOL	ITEM			CONDITION			MIN	MAX	UNIT
	VIH	High Level Input Voltage			XTLI, nPLLTST			3.5		V
					Others			2.2		V
	VIL	Low Level Input Voltage							0.8	V
	IIH	High Level Input Current			VIN=VDD			-10	10	uA
	IIL	Low Level Input Current			VIN=VSS			-10	10	uA
	IIL	With pull-up			Vin=VSS			-200	-10	uA
	IOZ	Output Leak Current		VOUT=VDD or VSS				-10	10	uA
	IDD	Dissipation Current			Operating				100	mA

SMSC TMC2005-JT Page 27 Revision 1.1 (07-24-07)

DATASHEET