USB2250/50i/51/51i
Ultra Fast USB 2.0 Multi-Slot
Flash Media Controller
PRODUCT FEATURES | Datasheet |
|
|
General Description
The SMSC USB2250/50i/51/51i is a USB 2.0 compliant, high speed Mass Storage Class Peripheral Controller intended for reading and writing to more than 24 popular flash media formats from the CompactFlash→ (CF), SmartMediaTM (SM), xD Picture CardTM (xD)1, Memory StickTM (MS), Secure Digital (SD), and MultiMediaCardTM (MMC) families.
The SMSC USB2250/50i/51/51i is a fully integrated, single chip solution capable of ultra high performance operation. Average sustained transfer rates exceeding 35MB/s are possible if the media and host can support those rates.
General Features
Targeted for applications in which single or "combo" media sockets are used
Supports multiple simultaneous card insertions
Flexible assignment of number of LUNs and how card types are associated with the LUNs
Pipelined hardware support for access to
Product name with “i” denotes the version that supports the industrial temperature range of
Hardware Features
Single Chip Flash Media Controller with
Flash Media Specification Revision Compliance
—Compact Flash Specification 4.1
–CF UDMA Modes
–CF PIO Modes
—Memory Stick Specification 1.43
—Memory Stick Pro Format Specification 1.02
—Memory Stick
–Memory Stick, MS Duo,
—xD Picture Card 1.2
—Smart Media Specification 1.3
—Secure Digital 2.0
–
—MultiMediaCard Specification 4.2
–1/4/8 bit MMC
SDIO and MMC Streaming Mode support
Extended configuration options
—xD player mode operation
—Socket switch polarities, etc.
Media Activity LED
GPIO configuration and polarity
—Up to 11 GPIOs (based on configuration) for special function use: LED indicators, button inputs, power control to memory devices, etc. The number of actual GPIO’s depends on the implementation configuration used.
—Four GPIO’s with up to 200 mA drive
—An additional 16 GPIO’s if CF is not used
On Board 24MHz Crystal Driver Circuit
Optional external 24MHz clock input
4 Independent Internal Card Power FET
—200mA each
—
8051
—60MHz - single cycle execution
—64KB ROM; 14KB RAM
Internal Regulator for 1.8V core operation
Optimized pinout improves signal routing, easing implementation and allowing for improved signal integrity
OEM Selectable Features
VID/PID/Language ID
Customizable Vendor specific data by optional use of external serial EEPROM
Bus- or
LED blink interval or duration
Internal power FET configuration
Software Features
Optimized for low latency interrupt handling
Reduced memory footprint
Device Firmware Upgrade (DFU) support of external EEPROM or External Flash
—Assembly line support
—End user field upgrade support
—DFU Package consists of driver, firmware, sample DFU application and source code, DFU driver API
Optional custom firmware with external ROM (up to 128k)
Please see the USB2250/50i/51/51i Software Release Notes for additional Software Features.
Applications
Flash Media Card Reader/Writer
Printers
Desktop and Mobile PCs
Consumer A/V
Media Players/Viewers
Vista ReadyBoostTM
1.) xD Picture Card not applicable to USB2251.
SMSC USB2250/50i/51/51i | DATASHEET | Revision 1.1 |