Snapper 1695195 installation instructions Install Hitch Hooks Hitch Rod Clamp Plate

Installation Instructions	Sub-Frame Hitch
A
	B
C
	D
	E

Figure 7. Install Hitch
A. J-Hooks	D. Hook
B. Hitch Rod	E. Clamp Plate
C. Hitch Rod

Install Hitch

1.Slide the hitch under the tractor.

2.Raise the rear of the hitch and place the hook (C) over the lift shaft.

3.Connect the front of the hitch to the tractor J-hooks (A, Figure 7) using the hitch rod (B) and a safety clip in the top holes of the push bar latch.

4.Secure the front of the hitch to the tractor by attach- ing the hitch rod (C) and a safety clip in the bottom holes of the push bar latch.

5.Push the clamp plate (D) backwards until it is snug against the lift shaft. Tighten the clamp plate hard- ware (E).

4