Snapper 18HP Specifications, Technical Manuals, Engine, Chassis, Transmissions, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

ENGINE:

18 HP* Kohler

Make	Kohler
Model	Courage 18
Horsepower	18 @ 3400 rpm
Displacement	32.6 Cu. in (535 cc)
Electrical System	12 Volt, 15 amp. Alternator, Battery: 340
Oil Capacity	CCA
	1.6 qt. ( 1.5L) w/ Filter

Oil Capacity	CCA
	56 Oz. (1.7 L) w/ Filter
CHASSIS:
Fuel Tank	Capacity: 6.5 Gallons (24.6 L)
Rear Wheels	Tire Size: 20 x 8.00 -10
Front Wheels	Inflation Pressure: 15 psi (1,03 bar)
	Tire Size: 11 x 4.00-5
	Inflation Pressure: 40 psi (2,76 bar)

TRANSMISSIONS:

19 HP* Kawasaki		HydroGear BDP-10A / HGM-12P
Make	Kawasaki	Type	Pump and Wheel Motor
Model	FH580V	Hydraulic Fluid	20W-50 conventional detergent motor oil
Horsepower	19 @ 3600 rpm	Speeds	Forward: 0-7 MPH (0-11.27 km/h)
Displacement	35.7 Cu. in (585 cc)	@ 3400 rpm	Reverse: 0-5 MPH (0-8.05 km/h)
Electrical System	12 Volt, 13 amp. Alternator, Battery: 340	Continuous Torque	266 ft. lbs. (359 N.m.)
	CCA	Output
Oil Capacity	3.8 US pt. ( 1.8L) w/ Filter	Maximum Weight	2000 lbs. (907 Kg) per Axle
20 HP* Kohler		on Axle
Make	Kohler	DIMENSIONS:
Model	Courage 20
Horsepower	20 @ 3400 rpm	Overall Length	78” (190,5 cm)
Displacement	36.4 Cu. in (597 cc)	Overall Width	41.5” (105 cm)
Electrical System	12 Volt, 15 amp. Alternator, Battery: 340	Height	42” (107 cm)
	CCA	Weight (apx.)
Oil Capacity	1.6 qt. ( 1.5L) w/ Filter	With 50” Mower Deck	723 lbs. (328 kg)
20 HP* Briggs & Stratton		With 44” Mower Deck	712 lbs. (322 kg)
Make	Briggs & Stratton
Model	Vanguard
Horsepower	20 @ 3400 rpm
Displacement	34.75 Cu. in (570 cc)
Electrical System	12 Volt, 16 amp. Alternator, Battery: 340

Engine Power Rating Information

The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given both the wide array of products on which engines are placed, and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.

.

Technical Manuals

Technical Manuals

Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the product’s components in exploded views (3D illustrations which show the relationship of parts

and how they go together) as well as part numbers and quantities used. Important assembly notes and and torque values are also included.

For applicable manuals currently available for your model, contact our Customer Publications Department at 262-284-8519 (Simplicity) / 866-313-6682 (Snapper). Have the information listed

in the box below available when phoning in your request. Technical manuals can be downloaded from

www.simplicitymfg.com www.snapper.com

Specifications

39