Fuel Tank
To remove the cap, turn counterclockwise.
PTO Switch
The PTO (Power
Features & Controls
Mower Height of Cut Adjustment
The cutting height adjustment knob controls the mower cutting height. The cutting height is infinitely adjustable between 1” and
Seat Adjustment Lever
The seat can be adjusted forward and back. Move the lever, position the seat as desired, and release the lever to lock the seat into position.
Transmission Release Valve Lever
The transmission release valve lever deactivates the transmission so that the tractor can be pushed by hand. See PUSHING THE TRACTOR BY HAND for opera- tional information.
Ignition Switch
The ignition switch starts and stops the engine, it has three positions:
OFF | Stops the engine and shuts off the |
| electrical system. |
RUN | Allows the engine to run and powers the |
| electrical system. |
START | Cranks the engine for starting. |
NOTE: Never leave the ignition switch in the RUN posi- tion with the engine
Brake Pedal
Depressing the brake pedal applies the tractor brake.
Ground Speed Lever
The tractor’s forward ground speed is controlled by the forward ground speed control lever. The tractor’s reverse ground speed is controlled by the reverse ground speed control pedal.
Moving the lever forward will increase ground speed. Note that the further forward the lever is moved, the faster the tractor will travel.
Parking Brake
The parking brake knob is used to lock the parking brake when the tractor is stopped. Fully depressing the brake pedal and pulling up on the knob engages the parking brake. Refer to page 10 for a full explanation of parking brake functions.
Attachment Lift Control Lever
When using the mower deck, lift the deck off the ground while transporting to and from the job site. DO NOT cut with the mower in the raised, transport position.
9
