Driving The Mower |
|
| To Slow or Stop Machine |
| ||
Before attempting to drive the mower make sure you have |
| 1. | Gently squeeze both reverse speed control levers evenly | |||
read the Features and Controls section and understand the |
|
| to slow the machine. |
| ||
location and function of the controls. |
|
| 2. | Continuing to squeeze the reverse speed control levers | ||
The hydrostatic transmission has an infinite number of |
|
| will stop the machine. |
| ||
| 3. | Once the machine is stopped, firmly depress the neutral | ||||
speeds between full speed forward and reverse, with the |
| |||||
faster speeds being achieved by moving the forward speed |
| return pedal to place the transmissions in neutral. | ||||
control lever and reverse speed control levers farthest in the | 4. | Engage the parking brake. | ||||
direction of travel. |
|
|
|
|
| |
For normal use, the throttle should be kept fully open and |
| NOTE: Continuing to squeeze the reverse speed control | ||||
the ground speed of the machine determined by the forward | levers after the machine is stopped, will cause the machine | |||||
speed control lever. When transporting the machine or when | to move in reverse. |
| ||||
loading or unloading from a truck or trailer, partial throttle |
| Turning the Machine |
| |||
should be used to slow the reaction time of the controls and |
| |||||
Note: Always reduce speed in a turn. | ||||||
reduce noise. |
|
| ||||
Practice maneuvering the machine at a slow engine speed on | Turning Left: |
| ||||
level ground with the PTO switch in the “OFF” position until | Gently squeeze the left hand reverse speed control lever (C). | |||||
you are familiar with the controls. |
|
| ||||
|
| A sharp or gentle turn is determined by the amount of force | ||||
|
|
| ||||
To Move Forward and Set Forward Speed |
| applied to the steering control lever. | ||||
|
|
|
| |||
1. Disengage the parking brake. |
|
| Tu ning Right: |
| ||
2. Gently move the forward speed control lever (A, Figure |
| Gently squeeze the r ght ha | d reverse speed control lever | |||
8) forward until desired speed is achieved. |
| |||||
| (D). A sharp or gen le turn is determined by the amount of | |||||
|
|
| ||||
To Move Backward |
|
| orce applied o he s eering control lever. | |||
1. Disengage the parking brake. |
| for |
| |||
2. Gently squeeze both reverse speed control levers (B) |
|
|
|
| ||
evenly, until desired speed is achieved. |
|
|
|
| ||
| Not |
|
|
| ||
A | Reproduction | |||||
| ||||||
| B |
|
| C | D | |
|
|
|
|
Figure 8. Driving the Mower
A.Forward Speed Control Lever
B.Reverse Speed Control Levers
C.Left Hand Speed Control Lever
D.Right Hand Speed Control Lever
16 | www.SnapperPro.com |