Regular Maintenance

Lubrication

Lubricate the unit at the locations shown in Figures 10 & 11 as well as the following lubrication points.

Grease:

•front caster wheel axles & yokes

•deck lift pivot blocks & linkages

•mower deck spindles

•mower deck idler arm

Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.

Lubricating the Front Casters:

NOTE: Front casters should be lubricated annually.

1.Remove the 1/4-28 bolt (A, Figure 11) screwed into the front caster and install a 1/4-28 grease fitting.

2.Grease the front caster.

Not all greases are compatible. Red Grease (p/n 5022285) is recommended, automotive-type high-temperature, lithium grease may be used when this is not available.

3.Remove the 1/4-28 grease fitting and reinstall the 1/4-28 bolt.

4.Repeat process for the other side of the machine.

Oil:

• control handle pivots

 

• deck lift pivots

 

• discharge chute hinge

A

• neutral return pedal pivots

 

 

Reproduction

S/N:

A

Not

for

 

 

 

Fig re 11. Front Caster & Wheel

 

 

 

A. 1/4-28 Bolt

 

 

 

C

 

B

 

 

 

 

 

 

2014523388

 

 

 

& Above

Figure 10. Lubrication Points

A. Mower Deck Lubrication Points B. Handle Bar Lubrication Points

C. General Lubrication Points (Left Side Shown, Right Side points identical.)

22

www.SnapperPro.com