Operation

 

 

 

 

WHEEL LOCK PINS

 

! WARNING

Place wheels in tilling position.

NEVER START ENGINE OR OPERATE TILLER WITH

1.

Remove lock pin. Align hole in axle with hole in wheel hub. (SEE

WHEELS IN FREE-WHEEL POSITION. THE FREE-

 

FIGURE 2)

 

WHEEL POSITION IS FOR TRANSPORTING THE

 

 

 

2.

Insert lock pin through holes, fold lock pin ring to secure pin to

TILLER LONG DISTANCES OVER LEVEL GROUND-

 

axle.

-DO NOT ATTEMPT TO MOVE THE TILLER UP OR

3.

Firmly lock wheel and axle together before tilling.

DOWN STEEP GRADES IN THE FREE-WHEEL
POSITION.

4.

Repeat for other wheel.

 

NOTE: Always have both wheel lock pins in or out. Do not operate tiller with only one wheel locked.

To place wheels in free-wheel position.

1. Remove lock pin. Slide wheel inward toward machine.

2. Insert pin in axle only.

3. Wheel should turn freely on axle.

HANDLEBAR HEIGHT ADJUSTMENT

Adjust handlebar height.

 

 

 

 

 

 

The ideal height of the handlebar varies with operator height and the

Wheel lock pin in free-wheel position.

depth of tilling. To adjust handlebar height: (SEE FIGURE 3)

(axle hole only)

 

1. Unscrew nuts and remove top and bottom bolts on each side.

FIGURE 2

 

 

2.

Align handlebar to desired holes on the lower handlebar mount.

 

 

height

3.

Install bolts and nuts. Retighten.

Not

for

lo k nuts

adjustment bolts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

height

 

 

 

 

 

height

 

adjustment bolts

 

 

 

 

adjustment holes

 

 

 

Reproduction

 

 

 

 

 

 

 

FIGURE 3

 

 

11