Maintenance
PROBLEM | REMEDY/ACTION | |
Belts squeal in neutral and/or reverse | s Adjust forward belt guide: |
|
| - turn engine off and allow | to cool |
| - disconnect spark plug wire and secure from spark plug | |
| - remove belt guard |
|
| - pull down on drive safety control levers | |
| - manually bend forward belt guide so there is 1/16 inch | |
| or less clearance between belt guide and belt | |
| - replace belt guard and spark plug wire | |
Belts squeal in forward operation |
| s | Adjust tabs on the reverse belt guide | ||
|
|
| - turn engine off and allow | to cool | |
|
|
| - disconnect spark plug wire and secure from spark plug | ||
|
|
| - release drive safety control levers to neutral position | ||
|
|
| - remove belt guard |
|
|
|
|
| - adjust tabs of reverse belt guide: | ||
|
|
| while drive safety control levers are released, bend | ||
|
|
| metal tabs on reverse belt guide to 1/64 inch or less | ||
|
|
| clearance from reverse belt |
| |
| Reproduction | ||||
|
|
| - replace belt guard and spark plug wire | ||
Excessive heat build up in transmission/tine | s | for | ll wi | g i structio s in Clean | |
Rem ve vegetation by f | |||||
area during tilling |
|
| Tine Axle Shaft of Normal Care section. | ||
|
|
| FOLLOW ALL SAFETY INSTRUCTIONS | ||
|
| s | Check transmission | and | if needed |
| Not |
|
|
| |
Page 20