Section 3 - MAINTENANCE

3.1 INTRODUCTION

To retain the quality of the SCRAMBLER, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number.

3.2 SERVICE - AFTER FIRST 5 HOURS

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and vent must be closed securely to prevent fuel spillage.

3.2.1. CHANGE ENGINE OIL

1.Place bricks or wooden blocks under the front wheels to lower rear of engine.

2.Place a 4 quart minimum capacity container under the end of the oil drain.

3.Loosen or remove oil fill cap on engine.

4.Install the drain hose (Supplied in hardware bag) onto drain plug nipple and place hose into drain container.

5.Rotate drain plug counter clockwise and pull out to open and allow oil to drain out. See Figure 3.1.

INSTALL HOSE

ONTO OIL DRAIN

NIPPLE

ROTATE 1/4 TURN

COUNTERCLOCKWISE

AND PULL OUT TO DRAIN OIL DRAIN

ENGINE OIL

FIGURE 3.1

6.After all the oil has drained, close the drain by pushing in and rotating clockwise to close. Wipe up any oil that may have spilled. Dispose of drained oil properly. See Figure 3.1.

7.Change oil filter at every oil change. Refer to your engine owner’s manual for service instructions.

8.Fill engine crankcase with new oil. Refer to your engine owner’s manual for oil specifications.

3.2.2. CHECK MOWER BLADE

1.Close vent on fuel cap and make sure cap is tight. Close fuel valve in fuel line. Start engine and allow it to run until engine runs out of fuel.

2.Apply parking brake.

3.Turn key to “OFF” position and remove key from ignition switch.

WARNING

Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.Carefully stand SCRAMBLER on rear bumper. It may be necessary to have help to stand unit up.

5.Check torque of blade mounting bolts. Torque

to:

33” Deck - 30 to 40 ft. lbs. See Figure 3.2.

6.Check blade for sharpness, wear and damage. Refer to Section “BLADE WEAR LIMITS”.

TORQUE BLADE MOUNTING

BOLTS TO 30 TO 40 FT. LBS.

SINGLE BLADE DECK

FIGURE 3.2

7.Check blade for straightness.

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to Section “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

12

Page 11 Page 13
Page 12
Image 12
Snapper EYZ16335BVE Maintenance, Service After First 5 Hours, Change Engine OIL, Check Mower Blade, Single Blade Deck
Page 11 Page 13

EYZ16335BVE specifications

The Snapper EYZ16335BVE is a versatile and powerful lawn mower designed for both residential and commercial use. Known for its exceptional cutting ability and user-friendly features, this model stands out in the competitive outdoor power equipment market.

At the heart of the Snapper EYZ16335BVE is a robust 163cc engine that delivers reliable power and efficient operation. The engine is designed to provide ample torque, ensuring that the mower can handle tough turf as well as fine lawns with ease. The self-propelled feature enhances maneuverability, allowing users to navigate through various terrains without putting extra strain on themselves.

One of the standout characteristics of the EYZ16335BVE is its 21-inch steel mowing deck, which provides superior durability and a wide cutting path for faster mowing. This model offers adjustable cutting heights, allowing users to choose between different grass lengths ranging from 1 to 4 inches. The ability to customize the cut makes it suitable for diverse grass types and can contribute to healthier lawn growth.

The Snapper EYZ16335BVE is equipped with a reliable 3-in-1 cutting system, offering options for mulching, bagging, or side discharge. This versatility allows users to manage lawn clippings efficiently based on their preferences or lawn care requirements. The mulching feature returns finely chopped clippings to the lawn, providing natural fertilization.

Ergonomically designed, this lawn mower includes a padded handle for comfort during operation. Its lightweight construction ensures that it is easy to maneuver and transport, reducing user fatigue during extended mowing sessions. The foldable handle is an additional convenience, making storage simple and efficient.

In terms of maintenance, the Snapper EYZ16335BVE is designed for ease of service. Accessible air filters and an easy-start engine design simplify routine maintenance tasks, ensuring that the mower operates at peak performance year-round.

Overall, the Snapper EYZ16335BVE embodies innovation and practicality, making it a reliable choice for homeowners and landscaping professionals. With its exceptional features, solid construction, and advanced technologies, it provides an efficient mowing solution that meets the demands of various lawn care needs. Whether tackling vast lawns or navigating smaller residential yards, the Snapper EYZ16335BVE consistently delivers results that exceed expectations.
Top Page Image Contents