Snapper LT-125 Maintenance Chart, Check Tire Pressure, Check Mower Blade Stopping Time, bar, Size, PSI

OPERATION

Maintenance Chart

TRACTOR AND MOWER				ENGINE
Every 8 Hours or Daily				First 5 Hours
Check safety interlock system				Change engine oil - see engine manual
Clean debris off tractor and mower deck				Every 8 Hours or Daily
Clean debris from engine compartment				Check engine oil level - see engine manual
Every 25 Hours or Annually *				Every 25 Hours or Annually *
Check mower blade stopping time				Clean engine air filter and pre-cleaner **
Check tractor and mower for loose hardware				Every 50 Hours or Annually *
Check tire pressure				Change engine oil
Every 50 Hours or Annually *				Replace oil filter
Check tractor brakes				Annually
Clean battery and cables				Replace air filter
See Dealer Annually to				Replace pre-cleaner
Lubricate tractor and mower				See Dealer Annually to
Check mower blades **				Inspect muffler a d spark arrester
* Whichever comes first				Replace spark plug
** Check blades more often in regions with sandy soils or				Replace fuel filter
high dust conditions.				Clean eng ne a r c ling system
				* Whi hever omes first
			for** Clean more often in dusty conditions or when airborne
				debris is present.
Check Tire Pressure				Check Mower Blade Stopping Time
Tire pressure should be checked periodically, and maintained				M wer blades and mower drive belt should come to a com-
		Not		plete stop within five seconds after the electric PTO switch
at the levels shown in the chart. Note that these pressu es may
differ slightly from the “Max Inflation” stamped on the side-wall				is turned off.
of the tires. The pressures shown provide prop r traction, im-				1. With tractor in neutral, PTO disengaged and operator in
prove cut quality, and extend tire life.
				seat, start the engine.
				2. Look over the left-hand footrest at the mower drive belt.
				Engage the PTO and wait several seconds. Disengage
		Reproductionthe PTO and check the amount of time it takes for the
				mower drive belt to stop.
				3. If mower drive belt does not stop within five seconds,
				see an authorized dealer.
Size	PSI	bar
15 x 6.0-6	12-14	0,82-0,96
20 x 10.0-8	10-12	0,68-0,82

20