IMPORTANT SAFETY INSTRUCTIONS

PREPARATION

(Continued From Previous Page)

6.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing.

7.Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area.

8.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

9.Make sure all safety decals are clearly legible. Replace if damaged.

10.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear.

11.Know how to STOP blades and engine quickly in preparation for emergencies.

12.Use extra care when loading or unloading the machine into a trailer or truck.

13.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or worn spots.

SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive

1.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

2.Use only an approved fuel container.

3.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

4.DO NOT refuel the machine indoors.

5.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

6.DO NOT fill fuel containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place the containers on the ground away from the vehicle before filling.

7.Remove gas-powered equipment from the vehicle or trailer and refuel it on the ground. If this is not possible, then refuel equipment using a portable container, rather than a gasoline dispenser nozzle.

8.DO NOT start gas powered equipment in enclosed vehicles or trailers.

9.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. DO NOT use a nozzle lock- open device

10.If fuel is spilled on clothing, change clothing immediately.

11.Never overfill a fuel tank. Replace fuel cap and tighten securely.

OPERATION

1.Mount and dismount machine from left side. Keep clear of discharge opening at all times.

2.Start engine from operator's seat, if possible. Make sure blades are OFF and parking brake is set.

3.DO NOT leave machine with engine running. STOP engine, STOP blades, SET brake, and Remove key before leaving operators position of any reason.

4.DO NOT operate machine unless properly seated with feet on feet rests or pedal(s).

5.STOP BLADES and ENGINE and make sure blades have stopped before removing grass catcher or unclogging mower to prevent loss of fingers or hand.

6.Blades must be OFF except when cutting grass. Set blades in highest position when mowing over rough ground.

7.Keep hands and feet away from rotating blades underneath deck. DO NOT place foot on ground while BLADES are ON or machine is in motion.

8.DO NOT operate machine without entire grass catcher or guards in place and working. DO NOT point discharge at people, passing cars, windows or doors.

9.Slow down before turning.

10.Watch out for traffic when near or crossing roadways.

11.STOP engine immediately after striking an obstruction. Inspect machine and repair damage before resuming operation.

12.Operate machine only in daylight or with good artificial light.

13.Move joystick (if equipped) SLOWLY to maintain control during speed and directional changes.

14.Exercise CAUTION when pulling loads. Limit loads to those you can safely control and attach loads to hitch plate as specified with SNAPPER attachment instructions.

15.On slopes, the weight of the towed equipment may cause loss of traction and loss of control. When towing, travel slowly and allow extra distance to stop.

16.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

17.DO NOT discharge material against a wall or obstruction. Material may ricochet back towards the operator.

18.Only use accessories approved by the manufacturer. See manufacturer’s instructions for proper operation and installation of accessories.

3

Page 2 Page 4
Page 3
Image 3
Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2, LT180H42IBV, LT200H42IBV2, LT200H48IBV2 Safe Handling of Gasoline
Page 2 Page 4

LT180H42IBV2, LT200H42IBV2, LT200H48IBV2, LT180H42IBV, LT200H42IBV2, LT200H48IBV2 specifications

The Snapper LT series of lawn tractors, including models LT180H42IBV2, LT200H42IBV2, LT200H48IBV2, LT180H42IBV, LT200H42IBV, and LT200H48IBV2, are designed to provide exceptional performance and user-friendly features for residential lawn care. Each model combines advanced technology with robust build quality, yielding reliable performance for homeowners looking to maintain their lawns with ease.

A key feature across the LT series is the powerful engine options. These tractors are equipped with premium engines that deliver impressive horsepower, ensuring a smooth cutting experience even in dense or tough grass conditions. Additionally, the innovative design offers a hydrostatic transmission, enabling seamless speed adjustments without the need for manual shifting. This promotes a more comfortable and controlled mowing experience.

The cutting decks of the Snapper LT models are another highlight, with options ranging from 42 inches to 48 inches for efficient grass cutting. This range allows users to choose the deck size that best suits their lawn size and complexity. The cutting height can be easily adjusted, providing versatility for maintaining the perfect lawn, whether it requires a close trim or a more elevated cut.

Another noteworthy characteristic of the Snapper LT series is the ergonomic seating and controls. The high-back seat is adjustable, providing comfort during extended mowing sessions, while the user-friendly dashboard keeps essential controls within easy reach. This design focus supports an overall better user experience, reducing fatigue during operation.

Safety is paramount in the design of the LT models. Features such as the automatic shut-off when the operator leaves the seat and robust construction contribute to a safer mowing environment.

Durability is also a hallmark of the Snapper LT series. The rugged chassis and durable materials used in the construction mean these tractors can withstand the rigors of regular use, ensuring long-term reliability and value.

Overall, the Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2, LT180H42IBV, LT200H42IBV, and LT200H48IBV2 offer an excellent combination of power, comfort, and versatility for homeowners. Their innovative features and robust performance position them as excellent choices for anyone looking to enhance their lawn care experience while achieving professional-looking results.
Top Page Image Contents