Snapper M26 Series, 151-3845 manual Care of Safety Signs, Locations

1051-3845, 7/04

SAFETY SECTION

SAFETY SIGNS AND LABELS

Care of Safety Signs

1.Keep safety signs clean and free from obstructing material.

2.Clean safety signs with soap and water; dry with a soft cloth.

3.Replace damaged or missing safety signs with new signs from SWEEPSTER.

Locations

4.If a component with safety sign(s) affixed is re- placed with a new part, make sure the new safety sign(s) is (are) attached in the same location(s) as the replaced components.

5.Install new safety signs on clean surfaces only. Spray a weak solution of soap and water on the surface before applying the safety sign. This will allow repositioning of the label. Squeegee any bubbles to the outside edge.

__________________________________________

Item Part Description

1. 50-0103 Label, Caution, To Avoid Injury

2.50-0104 Label, Danger, Lock-Collar, Unlock-Collar

3. 50-0115 Label, Danger, Rotating Drive

4.50-0145 Label, Warning, Rotating Broom

5. 50-0394 Label, Danger, Rotating Drive Line

6.50-0076-1 Label, Caution, Pinch Point

7. 50-0213 Label, Warning, Rotating Driveline