OPERATION SECTION OPERATING TIPS
If Material Piles in Front of Sweeper
•Decrease travel speed
•Increase the engine rpm
•Make more than 1 pass
•Raise the brush to decease the contact area
•Increase the sweeper angle
__________________________________________
If Brush Wears Unevenly
•Check for material wrapped around the brush
•Clean underneath the hood
__________________________________________
If Driveline Wears Quickly
•Decrease travel speeds
•Make more than 1 pass, especially in deep, heavy materials
•Avoid ramming piles
•Lack of lubrication – lubricate more often
__________________________________________
