2051-3845, 7/04
OPERATION SECTION REMOVING SWEEPER AND HITCH
Sweeper & Hitch Removal
NOTE – Whenever removed, install clevis pins, hitch pins, clips and hardware into the sweeper and hitch for storage.
1.Install stands in storage position and fully lower the attachment lift.
2.Disconnect the drive shaft by pulling back on the locking collar and then pulling the shaft off.
3.Disconnect hydraulic hoses. Disconnect hairpins and remove clevis pins. Slide hitch assembly off the slots on the tractor.
4.Detach the sweeper from the sweeper hitch by moving the shot pins into open position.
5.Lower the hitch to the ground and back out.
Brush head not shown
Lock
Open (Out)
