5 maintenance
GENERAL:
•Follow implicitly the engine manufacturer’s recommendations for maintenance.
•Always keep your machine clean - especially the engine deck. Check all adjustments periodically. Also, periodically check that all fasteners are secure. Remember, sharp blades cut better. Always have an extra set on hand. After
•Never make any adjustments to the unit until the engine is off and the spark plug wire is disconnected.
•If carburetor adjustment is necessary, stand to one side and keep feet and hands in the clear while making adjustments.
•Keep engine free of accumulations of grass, leaves or excessive grease. An accumulation of these combustible materials may result in a fire.
•Store gasoline in a safe and approved container in a cool, dry place.
•Keep the unit and any fuel containers in locked storage to prevent children from playing and/or tampering with them.
•Do not store gasoline powered equipment or fuel containers in a basement or any closed area where heating or heat appliances or open pilot lights are present, unless the fuel is completely drained from the power equipment and the fuel containers.
LUBRICATION:
•Your mower is equipped with numerous greaseable assemblies to ensure long life and minimal wear. It is imperative that the owner address these areas. All fittings should be lubricated using a
*LUBRICATION CHART
Qty | Location | Daily | Weekly |
2 | Caster Wheel Pivots | X |
|
2 | Caster Wheel Bearings | X |
|
2 | Mower Spindle Bearings |
| X |
2 | Drive Wheel Bearings |
| X |
All | Pivot Points |
| X |
In addition all linkage points and threaded adjustments should be oiled on a weekly schedule.
*NOTE: This maintenance is necessary to keep your warranty in effect.
GVTP
