Troubleshooting, Adjustment, & Service

CATCHER-FULL ALARM

ADJUSTMENT

There are two ways to adjust the “catcher full” alarm one for grass volume and one for sensitivity.

GRASS VOLUME ADJUSTMENT

Sliding the paddle bracket (C, Figure 32) up increases the volume of grass in the collector before the alarm goes off. Sliding the paddle bracket (C) down decreases the volume of grass in the collector before the alarm goes off.

1.Loosen bracket hardware (B).

2.Slide paddle bracket (C) up or down.

3.Tighten bracket hardware (B).

SENSITIVITY ADJUSTMENT

Sliding the carriage bolt, washer and nut (D) up decreas- es the sensitivity in the collector before the alarm goes off. Sliding the carriage bolt, washer and nut (D) down increases the sensitivity in the collector before the alarm goes off.

1.Loosen carriage bolt, washer and nut (D).

2.Slide carriage bolt, washer and nut (D) up or down the alarm paddle (A).

3.Tighten carriage bolt, washer and nut (D).

Note: It may be necessary to change the catcher-full alarm as turf conditions change.

MOWER LIFT ADJUSTMENT

The mower lift rod (A, Figure 33) can be inserted into two holes depending on the amount of mower lift desired. The upper hole provides higher mower lift when the attachment lift lever is placed in transport position. The lower hole will not lift the mower as high in transport position, but requires less lift effort.

BATTERY CHARGING

WARNING

Keep open flames and sparks away from the battery; the gasses coming from it are highly explosive. Ventilate the battery well during charging.

A dead battery or one too weak to start the engine may be the result of a defect in the charging system or other electrical component. If there is any doubt about the cause of the problem, see your dealer. If you need to replace the battery, follow the steps under Cleaning the Battery & Cables in the Regular Maintenance Section.

C

B

 

 

A

B

D

 

Figure 32. Catcher Alarm Adjustment

A. Alarm Paddle

C. Paddle Bracket

B. Bracket Hardware

D. Carriage Bolt, Washer

 

and Nut

A

Figure 33. Mower Lift Adjust

(Viewed from underneath right side of tractor) A. Mower Lift Rod

To charge the battery, follow the instructions provided by the battery charger manufacturer as well as all warnings included in the safety rules sections of this book. Charge the battery until fully charged (until the specific gravity of the electrolyte is 1.250 or higher and the electrolyte tem- perature is at least 60° F). Do not charge at a rate high- er than 10 amps.

30

Page 31 Page 33
Page 32
Image 32
Snapper XL Series manual Troubleshooting, Adjustment, & Service, CATCHER-FULL Alarm Adjustment, Mower Lift Adjustment
Page 31 Page 33

XL Series specifications

The Snapper XL Series is a cutting-edge line of outdoor power equipment designed for efficiency, durability, and ease of use. Aimed at both residential and commercial users, the Snapper XL Series stands out in its category for its advanced technologies and impressive features.

One of the standout features of the Snapper XL Series is its powerful engine options. Equipped with robust, high-performance engines, these machines offer excellent torque and acceleration, making them capable of handling tough mowing conditions. Users can choose between gas and battery-powered models, catering to various preferences and requirements for energy efficiency and sustainability.

The Snapper XL Series is designed with user comfort in mind. The ergonomic controls ensure that operators can easily navigate the equipment, reducing fatigue during extended use. Enhanced seat design with adjustable settings is also a highlight, ensuring that users of all sizes can find a comfortable and supportive position while mowing.

Another key characteristic of the Snapper XL Series is its innovative cutting technology. The series employs a unique cutting deck design that enhances airflow, providing a superior cut quality while promoting even grass distribution. This results in a professional finish, reducing the need for multiple passes over the same area.

Durability is a hallmark of the Snapper XL Series. Crafted from high-quality materials, these machines are built to withstand the rigors of outdoor use. The reinforced frames and heavy-duty components ensure longevity and dependability, making them a worthwhile investment for home and business owners alike.

The Snapper XL Series also includes a range of advanced safety features. These include automatic shut-off systems and operator presence controls, which help to prevent accidents and enhance user security.

In addition, the ease of maintenance is a major consideration in the design of the Snapper XL Series. With accessible engine components and user-friendly maintenance schedules, users can perform routine checks and servicing without hassle.

Moreover, technology integration allows for enhanced user experience, with some models featuring LED lights for better visibility during early morning or late evening tasks.

In conclusion, the Snapper XL Series combines power, comfort, and superior technology, making it an ideal choice for anyone looking for reliable outdoor equipment. Whether for residential lawns or large commercial properties, the Snapper XL Series proves to be a versatile solution to meet various gardening and landscaping needs.
Top Page Image Contents