Snapper XL Series Parking Brake Function, Emptying The Catcher, Rear Deflector, Select Models

Operating the Tractor

C

B

A

Figure 3. Engaging the Parking Brake

A. Ground Speed Pedals

B. Brake Pedal

C. Parking Brake Knob

PARKING BRAKE FUNCTION

B

A

Figure 4. Emptying the Hopper

A.Catcher Dump Pedal

B.Catcher Lever

Applying the Parking Brake - See Figure 3. To lock the parking brake, release the ground speed pedals (A), fully depress the brake pedal (B), pull UP on the parking brake knob (C), and then release brake pedal.

Releasing the Parking Brake - See Figure 3. To release the parking brake, fully depress the brake pedal

(B) and push the parking brake knob (C) DOWN.

EMPTYING THE CATCHER

To empty the catcher:

1.Depress the catcher dump pedal (A, Figure 4).

2.Extend the catcher lever (B) and use it to empty the catcher.

3.Use the lever (B) to close the catcher, and slide it back into the catcher.

REAR DEFLECTOR

(Select Models)

WARNING

Do not operate the unit without the hopper or deflector in place.

Installation & Removal

1.Remove the grass catcher (see Catcher Removal & Installation).

2.Slide deflector plate posts (B, Figure 5) into notches.

3.Mount deflector plate (A) by sliding clevis pins (C) through holes (E) securing with hair pins & washers

(F).

4.Removal is reverse of installation.

F
	A
	C
E
D	E
	B

Figure 5. Install Deflector Plate

A. Deflector Plate	D. Notches
B. Deflector Plate Posts	E. Holes
C. Clevis Pins	F. Hair Pins & Washers

14