4. FAULTS – CAUSES AND REMEDIES
DISPLAYREMEDY
Underload: only dashes appear at the bottom of the display field.
Overload: only dashes appear at the top of the display field. Maximum weighing range is exceeded.
Scales not stabilised when resetting.
Switch the scales off and then on again. The zero point is reset automatically.
Remove part of the weighed goods from the scales, or switch the scales off and then on again. The zero point is reset automatically.
Test the scales with a force shunt.
If you are unable to correct the fault or if other error messages appear, please contact your service partner.
18
