ASSEMBLY
1.Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the pack- aging materials and keep for future storage.
2.Attach the wheels to each wheelbase with the supplied wheel screws, small
WHEEL SCREW
WHEEL | SMALL SPRING WASHER |
SMALL WASHER
WHEEL BASE
3.Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down.
4.Attach a wheel base (with wheels attached) to each end of the heater body using the supplied standard screws, large
STANDARD SCREW LARGE SPRING WASHER
LARGE WASHER
WHEEL BASE
MICATHERMIC HEATER
6