Soleus Air KY-32E Setting The Clock, Press 1/0 button to turn on the remote control, Sleep Mode

SETTING THE CLOCK

1.Press 1/0 button to turn on the remote control.

2.Press the Hr and Min buttons until the LCD displays the correct time.

3.Press the Send button to set time.

COOLING OPERATION

1.Press the 1/0 button to turn on the remote control.

2.Press the Mode button until the LCD displays the cooling symbol.

3.Press either +°F or -°F button until the LCD displays the desired temperature. Each press will increase or decrease the set temperature by 1°F.

4.Press the Fan button until the LCD displays the desired fan speed.

5.Press the Send button.

DEHUMIDIFYING OPERATION

1.Press the 1/0 button to turn on the remote controller.

2.Press the Dry button. The dehumidifying symbol will appear on the LCD display.

3.Press either +°F or -°F button until the LCD displays the desired temperature.

4.Press the Fan button until the LCD displays the desired fan speed.

5.Press the Send button.

FAN OPERATION

1.Press the 1/0 button to turn on the remote controller.

2.Press the Mode button until the LCD displays the fan symbol.

3.Press the Fan button until the LCD displays the desired fan speed.

4.Press the Send button.

AUTO MODE

1.Press the 1/0 button to turn on the remote controller.

2.Press the Mode button until the LCD displays the auto symbol.

3.Press the Send button.

TIMER

1.Press the 1/0 button to turn on the remote control.

2.Press the Timer button. “TIMER” will appear on the LCD display.

3.Press the Hr button until the LCD displays the desired number of hours for the operation. When the set time has elapsed (from 0.5 to 24 hrs), the unit will automatically shut off.

4.Press the Send button.

NOTE: The unit can also be programmed to automatically start after a set period of time in Sleep Mode.

SLEEP MODE

1.Press the 1/0 button to turn on the remote control.

2.Press the Mode key to select the desired operation.

3.Press the +°F or -°F button until the LCD displays the desired temperature.

4.Press the Fan button until the LCD displays the desired fan speed.

5.Press the Send button.

6.Press the Sleep button. “Sleep” will appear on the LCD display.

7.To set the auto start time, press the Hr button until the desired number of hours until auto start is displayed.

8.Press the Send button. The unit will automatically start after the set number of hours (from 1 to 7 hrs).

13