ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should know.

�The Remote Control will operate all the control panel features, follow the same instructions.

�

!

The "Cool "circuit has an automatic 3 minute time delayed start if the unit is turned off

!

 

 

 

 

and on quickly. This prevents overheating of the compressor and possible circuit

 

 

 

breaker tripping. The fan will continue to run during this time.

 

�The control will maintain any set temperature between 60F and 90F degrees (cooling), 55F and 80F (heating).

�The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the Up and Down Temperature Selection Pads at the same time for 3 seconds.

COMPRESSOR

The compressor is hermetically sealed, permanently lubri- cated and requires no additional oiling.

FRONT PANEL AND GRILLE

The front panel and grille can be cleaned with a mild soap or detergent. Do not use hydrocarbon-based cleaners (e.g. acetone, benzene, naphtha, gasoline, etc.) to clean the front panel or grille.Use care when cleaning the control areaDo. not use an excessively wet cleaning cloth.

SCHEDULED MAINTENANCE

To achieve continuing top performance and high efficiency, a regular cleaning/inspection schedule must be established. Maintaining this schedule can be accomplished by either a local maintenance staff or an authorized servicer and must follow the instructions described in this manual.

•If the unit is operated in a dusty climate, dust may collect in the basepan and clog the condenser coil.It is advisable to remove the unit from the sleeve and thor- oughly clean the basepan and condenser coil on a periodic basis.

•If the unit is installed ocean side or in a corrosive atmosphere, its life may be greatly reduced by the corrosive environment. Under these conditions, the unit should be removed from the sleeve and completely cleaned once a year. At that time any scratches or blisters on the painted surfaces should be sanded and repainted.

NormalOperatingSoundsandConditions

POPPING OR GURGLING SOUNDS

This sound is the refrigerant traveling through the lines.This is a normal sound which may be heard for a few seconds after the unit shuts off.

WATER TRICKLING SOUNDS

This sound is produced by the water as it is picked up and run over the coils.This procedure improves the efficiency of the unit and helps with water removal.

WATER DRIPPING

Water will collect in the basepan during high humidity days.

STARTING DELAY

You may notice a short delay in the startup if you try to restart the unit too soon after turning it off or if you adjust the thermostat right after the compressor has shut off. This delay protects the compressor.

ObtainingService

In the unlikely event this unit requires repair or servicing beyond what is covered in this manual, contact an autho- rized service organization.

To obtain an authorized servicer, contact your sales repre- sentative or agency.

OUTDOOR COIL CLEANING

The coils on the outdoor side of the air conditioner should be checked regularly. For cleaning outside coil, remove the 6 screws that mount the condenser coil top cover to condenser shroud.

13

Page 15 Page 17
Page 16
Image 16
Soleus Air SG-TTW-09HC-26, SG-TTW-12HC-26, SG-TTW-12ESEZ-26 manual NormalOperatingSoundsandConditions, ObtainingService
Page 15 Page 17

SG-TTW-09ESE-26, SG-TTW-12ESEZ-26, SG-TTW-12HC-26, SG-TTW-09HC-26 specifications

The Soleus Air SG-TTW-09HC-26, SG-TTW-09ESE-26, SG-TTW-12HC-26, and SG-TTW-12ESEZ-26 are part of Soleus Air's innovative line of through-the-wall air conditioners. These models are designed to offer an efficient and comfortable climate control solution for both residential and commercial spaces. Each model caters to varying needs in terms of capacity and features, making them versatile options for a range of environments.

The SG-TTW-09HC-26 is a 9,000 BTU unit that excels in energy efficiency, operating at a high EER (Energy Efficiency Ratio) to provide cooling while minimizing energy consumption. This model offers both cooling and heating capabilities, making it suitable for year-round use in climates that experience varying temperatures.

The SG-TTW-09ESE-26 focuses on cooling performance with a powerful compressor that ensures consistent airflow and optimal temperature control. This model is ideal for smaller spaces, providing quick and efficient cooling while maintaining an aesthetically pleasing design that integrates well into your wall unit.

For larger spaces, the SG-TTW-12HC-26 delivers 12,000 BTUs of cooling and heating capacity. It features advanced technology such as a multi-speed fan system, allowing users to customize the airflow according to their preference. The programmable thermostat enhances user convenience, enabling precise temperature settings to maintain a comfortable environment effortlessly.

The SG-TTW-12ESEZ-26 stands out for its Quiet Operation feature, which is particularly beneficial for bedrooms or offices where noise levels should be minimized. This model also includes energy-saving features, such as a sleep mode that adjusts the temperature throughout the night to conserve power. Moreover, the installation process for these units is straightforward, thanks to their compact design tailored for through-the-wall installation.

Each of these Soleus Air models is equipped with user-friendly controls and a remote control option, enhancing usability. Furthermore, the washable air filter ensures clean air circulation and easy maintenance, thereby contributing to a healthier indoor environment.

In summary, the Soleus Air SG-TTW-09HC-26, SG-TTW-09ESE-26, SG-TTW-12HC-26, and SG-TTW-12ESEZ-26 offer a comprehensive range of features designed to meet diverse cooling and heating needs. Their energy-efficient operation, effective temperature control, and user-centric designs make them excellent choices for anyone looking to enhance their living or working environment.
Top Page Image Contents