Soleus Air SG-TTW-09ESE-26 manual Air Direction, VENT CONTROL AND AIR DIRECTION See Figure E

Models: SG-TTW-09ESE-26 SG-TTW-12ESEZ-26 SG-TTW-12HC-26 SG-TTW-09HC-26

1 17
Download 17 pages 12.58 Kb
Page 7
Image 7
AIR DIRECTION:

To replace front grille:

Grille

Tab

EXHAUST AIR VENT

Figure 4

AIR DIRECTION:

Hook the tabs on the front grille even with the tabs on the case and snap into place. Replace the screws and filter. Refer to Page 4, Figure A.

Horizontal louvers on the front grille let you control the air direction up and down.

VENT CONTROL AND AIR DIRECTION (See Figure E)

The vent control is located behind the front grille on the right side of the air discharge area. When set at CLOSE only the air inside the room will be circulated and conditioned. When set at OPEN, some inside air is exhausted outside.

Locating

Locating

Hole

Hole

Screw Hole

Screw Hole

OPEN position

CLOSE position

(Mesh end toward back)

(Mesh end toward front\

Figure E

To open or close the vent:

1.Remove the front grille.

2.Remove the vent card screw.

3.Remove the vent card, turn it over and replace it by locating rear hole in card over locating pin inside air discharge and reattaching screw at front.

4

Page 7
Image 7
Soleus Air SG-TTW-09ESE-26, SG-TTW-09HC-26, SG-TTW-12HC-26 Air Direction, VENT CONTROL AND AIR DIRECTION See Figure E